2
Congratulations on purchasing our Russell Hobbs Water Dispenser. Each unit is manufactured to
ensure safety and reliability. Before using this appliance for the first time, please read the instruction
manual carefully and keep it for future reference.
FEATURES OF THE RUSSELL HOBBS WATER DISPENSER
•
Hot, cold and ambient water options
•
Hot Water Temperature and Heating Capacity: 85-95
℃
5L/h.
•
Cold Water Temperature and Cooling Capacity: 8-12
℃
2L/h .
•
Heating Power:500W
•
Cooling Power: 85W/90W
•
Over-Current Protection
•
Automatic Thermostat Technology
•
All the plastic parts are made of anti-bacteria ABS
•
For domestic use only
•
2 year warranty
IMPORTANT SAFEGUARDS
1. Always ensure that the voltage on the rating label corresponds to the mains voltage in your
home.
2. Your appliance has been designed for household and workplace use only.
3. Your close supervision is necessary when the appliance is used by children, people having
insufficient experience and knowledge, physically (audio, visual) or mentally handicapped
people. Make sure that children do not play with the appliance.
4. Use of an extension cord with this appliance is not recommended. However, if it is necessary
to use an extension cord, ensure that the cord is suited to the power consumption of the
appliance to avoid overheating of the extension cord, appliance or plug point. Do not place the
extension cord in a position where it can be pulled on by children or animals or tripped over.
5. Your water dispenser should be at least 30 cm away from heat sources such as furnace, oven,
heater core, stove and electric oven, and should not be kept under direct sunlight.
6. For efficient operation of your water dispenser, ambient temperature should be minimum 6°C
and maximum 30°C.
7. Safe operating temperature of the appliance is 45°C.
8. Leave sufficient space (10-20cm) behind the water dispenser to allow for good ventilation
9. If two water dispensers are placed side by side, at least 2 cm space should be left between
them.
10. Ensure that your water dispenser stands balanced on the flat, level ground. This should be
done before the dispenser water bottle is placed.
