23
MEMORY
This function allows you to program your own settings into the memory of the microwave
oven.
You can store up to 3 memory programs.
Programming memories:
1. Press ‘Memory’ repeatedly to cycle through memory locations 1 to 3. Stop on the
location you wish to program.
2. Set the function you want:
I.e.
Step 1:
Select ‘Microwave’, ‘Grill’, ‘Convec.’ OR ‘Combine’ cooking.
Step 2:
Depending on the function selected in step 1, select the appropriate power level,
temperature or combination.
NOTE: There is only one temperature setting for grilling (‘G-1’).
3. Following this, set the time by pressing the number keys to enter the required cooking
time in minutes and seconds. For example, to cook for 1min 30secs, enter 1,3,0. To cook
for 15 minutes, enter 1,5,0,0. To cook for 1hr 15 minutes, enter 75 minutes as 7,5,0,0 (the
maximum time is 99 minutes and 99 seconds).
4. Press ‘Memory’ to save the memory program set, or press ‘START/+30SEC’ to start
cooking and save the program automatically.
NOTE: You may press ‘STOP/Clear’ to exit programming mode at any time.
Using programmed memories:
1. Press ‘Memory’ repeatedly to cycle through the memory locations 1 to 3 and stop at the
location you wish to use.
2. Press ‘START/+30SEC’ - the unit will start, using the time and cook settings programmed
into that memory location.
3. When the programmed time has elapsed, 5 beeps will sound and the LED screen will
return to clock mode.
NOTE: If the oven is disconnected from the wall power outlet, the memories will require
re-programming.
MULTI-STAGE COOKING
Multi-stage cooking allows two stages of cooking using different settings. This is ideal for
defrosting followed on immediately with cooking or cooking items that may require 2 separate
power levels during the cooking process.
Set up both stages of cooking using the same processes used for the main functions (see
“MICROWAVE”, “GRILL”, “CONVECTION” or “COMBINATION” cooking) or either of the
DEFROST functions.
You must proceed immediately to set up the 2nd stage before
pressing ‘START/+30SEC’.
The below example is for a Weight Defrost for
1540g
of food followed by MICROWAVE at
80% power for 12 minutes.
1. Press ‘Defrost’ twice to arrive at the ‘d-2’ setting (you may also select ‘d-3’ or ‘d-4’ if
applicable – see “DEFROST BY WEIGHT”). Using the number keys, enter the weight in
grams - 1,5,4,0.
