14
2. Press the ‘START/+30SEC’ key to begin the pre-heating process. The Convection
cooking icon will flash on the LED screen while it is heating.
3. Once it has reached temperature the unit will sound twice and the temperature will flash
on the LED screen.
NOTE: When preheating, the cooking time cannot be input until after the unit reaches
temperature and the door has been opened.
4. Open the door and place the food inside. Close the door and set the time by pressing the
number keys to enter the required cooking time in minutes and seconds. For example,
to cook for 1min 30secs, enter 1,3,0. To cook for 15 minutes, enter 1,5,0,0. To cook for
1hr 15 minutes, enter 75 minutes as 7,5,0,0 (the maximum time is 99 minutes and 99
seconds).
NOTE: After 5 minutes of inactivity the unit will revert to idle mode.
5. Press ‘START/+30SEC’ to begin cooking.
USING WITHOUT PREHEAT FUNCTION
The Convection function may be used without preheating the unit as follows:
1. Press the ‘Convec.’ key and the LED screen will display ‘150°C’. Set and change the
temperature by pressing the ‘Convec.’ key repeatedly until the desired temperature is
reached (see table above).
2. Following this, set the time by pressing the number keys to enter the required cooking
time in minutes and seconds. For example, to cook for 1 min 30 secs, enter 1,3,0. To
cook for 15 minutes, enter 1,5,0,0. To cook for 1hr 15 minutes, enter 75 minutes as 7,5,0,0
(the maximum time is 99 minutes and 99 seconds).
3. Press the ‘START/+30SEC’ key to start cooking.
NOTE: Press ‘STOP/Clear’ once to pause the unit and twice to cancel the operation.
Cooking time may also be increased in 30 second increments by pressing
‘START/+30SEC’ repeatedly.
