BEFORE FIRST USE
•
Carefully remove all contents from the box.
•
Take extreme care when unpacking and handling the sharp blades.
•
As some parts may be packed separately, check to ensure all items have been unpacked before
disposing of the packaging.
•
All parts of the Mini Processor need to be thoroughly cleaned before being used for the first time.
(see ‘CLEANING’ section below)
ASSEMBLING THE BLADE SYSTEM
CAUTION: The Blades are very sharp. Use caution when handling.
•
Sit the bottom of the chopping blade on a flat stable surface.
•
Hold the bottom of the chopping blade by the centre shaft.
•
Take the smaller top chopping blade and insert over the top of the centre shaft and gently
turn anti-clockwise until it locks into place.
•
Holding the blade system by the centre shaft, sit the blade system onto the central axis
of the processor bowl.
•
Reverse the process to disassemble the chopping blades.
USING THE MINI PROCESSOR
The mini processor is ideal for chopping parsley, onions, hazelnuts, bread crumbs, biscuits,
baby food, etc.
•
NOTE: The bottom chopping blade can also be used with the top blade. Simply sit the bottom
blade on the central axis of the processor bowl.
•
Place the food into the bowl.
•
Fit the lid onto the processor bowl by aligning the lid notches with the indents on the bowl.
•
Press the lid down lightly to activate the seal.
•
Fit the motor unit onto the lid. Align by using the weight of the motor unit and rotating until
the grooves at the bottom slide into those of the lid.
•
Make sure the power cord does not hang over the feed chute.
•
Place your hand on top of the lid to hold the processor steady.
•
Insert the plug into a wall power outlet and switch the outlet on.
•
Press and hold the pulse button to start the motor.
•
NOTE: Food can be added without removing the motor unit and lid by inserting food
through the feed chute.
•
Release the button to stop the motor.
•
To disengage the motor unit from the processor lid, lift the motor unit up.
CAUTION: Be sure the chopping blades have completely stopped spinning before removing
the motor unit.
•
To remove the lid from the processor bowl, gently lift using the lid handles.
•
After use, switch off the wall power outlet and remove the plug.
