5
3. Place the stainless steel filter into the driving shaft. Make sure that the filter is fitted
securely onto the driving shaft (‘click’). Always check the filter before use. If you
detect any cracks or damage, do not use the appliance.
4. Click the two safety clamps onto the lid to lock it into place (‘click’).
5. Align the groove in the pusher with the small protrusion on the inside of the feeding
tube and slide the pusher into the feeding tube. Make sure the clamps are locked
into position on either side of the lid.
6. Place the juice jug under the spout.
7. Wash the fruit and/or vegetables and cut them into pieces that fit into the feeding
tube.
8. Never seal the juice spout with the juice stopper during operation.
9. Press the On/Off speed switch to setting 1 (low speed) or 2 (high speed) to switch
on the appliance.
Note: The appliance will only function if all parts have been properly assembled and
the lid has been properly locked into place with the clamps.
10. Put the pre-cut pieces into the feeding tube and gently press them down towards the
rotating filter with the pusher. Do not exert too much pressure on the pusher, as this
could affect the quality of the end result and it could even cause the filter to come to
a halt.
Never insert your fingers or an object into the feeding tube. After you have
processed all ingredients and the juice flow has stopped, switch off the
appliance and wait until the filter has stopped rotating.
1
2
3
4
5
