RHHS3101
Revision 1.7
PROBLEM SOLVING
The vacuum cleaner
doesn’t switch on
Check the vacuum is charged by plugging in for 4-5 hours
Check for any obvious signs of damage to vacuum, adapter,
or plug
If recently used, allow to cool for 1 hour then try again
The suction is
decreasing and dirt
is not adequately
being picked up
Check if the dust canister is full; if so, empty it
Clean the filters following the instructions in this manual
Check there are no blockages in the tube, and clear any
obstructions
Vacuum cleaner is
over heating
Check the filters are clean
Dust is coming out
of the vacuum
The dust canister has not been fitted correctly. Refit the
canister following the instructions in this manual.
The air exhausted
from the vacuum
smells
Clean the filters, tube, and dust container following the
instructions in this manual
The vacuum cleaner
has cut out
Allow the vacuum to cool for 1 hour. Clean all filters and
dust containers before trying to use again.
If you are still experiencing difficulties with the appliance please
contact us BEFORE returning the appliance to the retailer it was
purchased from:
Website: https://mda.russellhobbs.com
Telephone: 0345 209 7461
Address: Product Care Customer Service, Green Bank Business Park, Hindley Green,
Wigan, WN2 4AY