Positioning
•
This appliance is to be installed in a counter top.
•
Avoid damaging the product during installation.
•
The appliance can only be used safely if it is correctly installed according to the
safety instructions. The installer is responsible for ensuring that the appliance
works correct when installed.
•
Gas appliances must be disconnected and installed by a Gas Safe registered
engineer. This scheme has replaced the Corgi registration scheme. For details
visit www.gassaferegister.co.uk or call 0800 408 5500. Failure to do so will
invalidate your guarantee, liability claims and could lead to criminal
prosecution.
•
The edges of the hob must be a minimum of 60mm from a side or rear wall.
•
The highest point of the hob (including the burners) must be a minimum of
700mm from the underside of any surface
directly
above it.
•
The highest point of the hob (including the burners) must be a minimum of
400mm from the underside of any surface
either side
of the hob. If any surface
either side
of the hob is lower than 400mm, then it must be at least 50mm
from the outer edges of the hob.
•
There must be a minimum of 50mm of clearance around the hob and any
combustible materials.
7
600mm
400mm
400mm
700mm
200mm
