Installation
Gas connection
•
Gas appliances must be disconnected, installed and maintained by a Gas Safe
registered engineer. This scheme has replaced the Corgi registration scheme.
For details visit www.gassaferegister.co.uk or call 0800 408 5500. Failure to
do so will invalidate your guarantee, liability claims and could lead to criminal
prosecution.
•
This appliance is supplied to run on LPG and natural gas, conversion to LPG or
natural gas must be undertaken by a Gas Safe registered engineer. This
scheme has replaced the Corgi registration scheme. For details visit
www.gassaferegister.co.uk or call 0800 408 5500. Failure to do so will
invalidate your guarantee, liability claims and could lead to criminal
prosecution.
•
During connection, always keep the nut on the gas manifold fixed while
rotating the counter-part. Use appropriately-sized spanners for a safe
connection.
•
For surfaces between different components always use the seals provided in
the gas conversion kit.
•
The seals used during connection should also be approved to be used in gas
connections. Do not use plumbing seals for gas connections.
•
Remember that this appliance is ready to be connected to the gas supply in
the country for which it has been produced. The main country of destination
is marked on the rear cover of the appliance. If you need to use it in another
country, any of the connections in the figure below may be required. In such a
case, contact local authorities to learn the correct gas connection.
WARNING: Do not use a naked flame to check for gas leaks
For Customer Services & Spare Parts please call
0345 208 8750
or visit us at
https://mda.russellhobbs.com
10
