background image

5

turbo brush

  used with the tubes, for floors and carpets, it has a 

rotating, suction powered brush, for deep cleaning.

crevice tool

  as the name implies, down the sides of upholstery, 

in awkward spaces nothing else can reach.

small brush

  to remove dust from blinds and curtains, and to 

brush/clean awkward corners.

sofa brush

  to remove pet hair, lint, and dust from upholstery, 

and other small, flat areas – don’t use it on hanging 
curtains, as it doesn’t have the bristles necessary to 
let air flow freely, use the small brush instead.

C

  EXTENDABLE TUBE

11  Use the extendable tube to the nozzle for floors, carpets, or hard 

to reach places:
a)  push the tube release towards the narrow end of the tube, 

and keep it pressed

b)  pull out as much of the inner tube as you need
c)  if you’ve finished using it, push it back
d)  return the tube release to the locked position

12  Fit the wide end of the extendable tube to the nozzle.
13  Choose a tool, and fit it to the narrow end of the tube.

C

  SUCTION CONTROL

14  There are two ways to control the suction:

a) The suction control on top of the cleaner – move it towards 

max to increase suction, towards min to reduce suction.

b) The suction control on the nozzle – move it towards the nozzle 

for maximum suction, away from the nozzle, to reduce suction.

C

  POWER UP

caution

 If you’ve accidentally pressed the on/off switch 

3

, the 

cleaner may start up when you plug it in.

15  Plug the cable into a  power socket (switch the socket on).
16  Press and release the on/off switch 

3

, to turn the cleaner on.

Summary of Contents for 18213













Reviews: