5
7 Turn it slightly, to engage the top of the blade unit.
8 Plug it in (switch the socket on, if it’s switchable).
9 Press down on the top of the motor unit to start processing.
10 Keep an eye on the bowl, to avoid over-processing.
11 Release the top of the motor unit to stop processing.
12 Process in bursts of a few seconds at a time, and inspect
the results between bursts.
done?
13 Lift the motor unit off the bowl.
14 Squeeze the grips on the sides of the guard gently
together, and lift the guard out of the bowl.
15 Put a finger on top of the blade unit, to stop it falling out.
16 Tip the processed contents out of the bowl.
17 Alternatively, hold the plastic part of the blade unit, and lift
it straight up and out of the bowl.
18 Fit the dispensing lid to the bowl – it has two sets of holes,
for sprinkling and dusting
a couple of tips
•
Cut your ingredients into small pieces before processing.
•
Chocolate, nuts, and cheese will chop better if chilled.
care and maintenance
1 Unplug the mini-chopper before dismantling or cleaning.
2 Lift the motor unit off the bowl.
3 Squeeze the grips on the sides of the guard gently
together, and lift the guard out of the bowl.
4 Hold the plastic part of the blade unit, and lift it straight up
and out of the bowl. Take care – the blades are sharp.
5 Take care cleaning the blade unit – if you can’t
see what you’re doing, don’t do it.
6 Wipe the surfaces of the motor unit with a damp cloth.
7 Wash the guard, bowl, and blade unit in warm soapy water.
Summary of Contents for 14450
Page 1: ...instructions...
Page 2: ...2...
