22
RUSH MH 5 Profile User Manual
•
YES adds a one-second (approx.) smooth fade to changes in dimming
level sent from the controller. This gives the smoothest dimmer fading.
To set the dimmer speed:
1. Select DIMMER SPEED and press ENTER to confirm.
2. Use the DOWN and UP buttons to select YES or NO. Press ENTER to
confirm.
Auto test
To perform a complete test of all of the fixture functions:
1. Select AUTO TEST and press ENTER.
2. Press ENTER again. The fixture will run a self-test routine.
3. Press MENU to exit the test.
Temperature
To check the onboard temperature of the fixture:
1. Select TEMP. and press ENTER. The display will show the temperature of
the unit.
2. Press MENU to exit.
Fixture time
To display the fixture’s operating hours counter:
1. Select FIXTURE TIME and press ENTER. The display will show the
number of working hours of the unit.
2. Press MENU to exit.
Firmware version
To display the fixture’s installed firmware version number:
1. Select FIRMWARE VERSION and press ENTER. The display will show
the version of software of the unit.
2. Press MENU to exit.
Factory default settings
To return all the settings in the control menu to their factory defaults,
cancelling any changes made by users:
1. Select DEFAULTS and press ENTER.
2. Select YES and press ENTER to confirm.
