background image

RUSH MH 1 Profile Plus User Manual 

Safety information 

 

WARNING! 

Read the safety precautions in this manual before installing, 

operating or servicing this product.

 

 

The following symbols are used to identify important safety information on the 
product and in this manual: 

 

Warning! 

Safety hazard. 
Risk of severe 

injury or 

death. 

Warning! 

Powerful light 

emission. Risk 

of eye injury. 

Warning! 

See user 

manual for 

important 

safety 

information. 

Warning! 

Hazardous 

voltage. Risk 

of lethal or 

severe electric 

shock. 

Warning! 

Hot surfaces 

and fire 

hazard. 

 

 

Warning! Risk Group 2 product according to EN 62471. Do not 
stare directly into the beam. Do not view the light output with 
optical instruments or any device that may concentrate the 
beam. 

This lighting fixture is for professional use only and must be 
installed by a qualified technician. It is not for household use. It 
presents risks of severe injury or death due to fire hazards, 
electric shock and falls. It produces a powerful, concentrated 
beam of light that can create a fire hazard or a risk of eye injury 
if the safety precautions below are not followed. 

 

Install, operate and service RUSH by Martin™ products only as 
directed in their user manuals, or you may create a safety 
hazard or cause damage that is not covered by product 
warranties. 

Follow the safety precautions listed below and observe all 
warnings in this manual and printed on the product. Keep this 
user manual for future use.  
 

Summary of Contents for MH 1 Profile Plus













































Reviews: