RUSH MH 1 Profile Plus User Manual
17
Show settings
Show settings determine the behavior of the fixture when it is disconnected
from DMX and if, and how, it will run one of the onboard shows.
Offline mode
Offline mode defines what the fixture will do if it loses or is not connected to a
DMX signal. There are three options: M/S (enter stand-alone Show Mode),
HOLD (do nothing), or BLACKOUT.
To set a fixture’s offline mode:
1. Select SHOW SETTINGS and press ENTER to confirm.
2. Use the DOWN and UP buttons to select OFFLINE MODE and press
ENTER to confirm.
3. Use the DOWN and UP buttons to select M/S, HOLD, or BLACKOUT.
4. Once the offline mode has been selected, press ENTER to set (or press
MENU to exit without saving any changes).
Show settings
Show mode provides four preprogrammed shows. These are not accessible
via DMX. Show mode can be combined with music trig sound activation to
provide a synchronized light show.
To set a fixture’s show mode:
1. Select SHOW SETTINGS and press ENTER to confirm.
2. Use the DOWN and UP buttons to select SHOW MODE and press
ENTER to confirm.
3. Use the DOWN and UP buttons to select SHOW 1, SHOW 2, SHOW 3 or
SHOW 4.
4. Once the show has been selected, press ENTER to set (or press MENU
to exit without saving any changes).
Setting focus for gobo wheels 1 and 2
For the shows, you can set focus for each of the two gobo wheels: 1 (rotating
gobos) and 2 (fixed gobos).
To set the focus for a gobo wheel:
1. Select SHOW SETTINGS and press ENTER to confirm.
2. Use the DOWN and UP buttons to select FOCUS 1 or FOCUS 2
(corresponding to wheel 1 (rotating) or wheel 2 (fixed)) and press ENTER
to confirm.
3. Use the DOWN and UP buttons to change the focus point from 0…255.
