Rush Gobo Projector 1, User Manual

Page: 8 / 24

RUSH Gobo Projector 1
TM
User Manual 8
Protection from eye injury
Do not stare directly into the light output. Ensure that persons
are not looking directly into the LEDs when the product lights up
suddenly. This can happen when power is applied.
Do not look at the light output with magnifiers, telescopes,
binoculars or similar optical instruments that may concentrate
the light output.
To minimize the risk of eye irritation or injury, disconnect the
fixture from power at all times when the fixture is not in use, and
provide well-lit conditions to reduce the pupil diameter of anyone
working on or near the fixture.
Protection from injury
Fasten the fixture securely to a fixed surface or structure with a
minimum of two permanent fasteners. Do not fasten with
clamps. The fixture is not portable when installed.
Ensure that any supporting structure and/or hardware used can
hold at least 10 times the weight of all the devices they support.
Check that all external covers and rigging hardware are securely
fastened.
Do not operate the fixture with missing or damaged covers,
shields or any optical component. If shields, lenses or ultraviolet
screens have become visibly damaged to such an extent that
their effectiveness is impaired, for example by cracks or deep
scratches, send the fixture to an authorized Martin™ service
agent for replacement.
Block access below the work area and work from a stable
platform whenever installing, servicing or moving the fixture.
In the event of an operating problem, stop using the fixture
immediately and disconnect it from power. Do not attempt to use
a fixture that is obviously damaged.
Do not modify the fixture in any way not described in this manual
or install other than genuine RUSH by Martin™ parts.