Rush Gobo Projector 1, User Manual

Page: 10 / 24

RUSH Gobo Projector 1
TM
User Manual 10
Physical installation
Read ‘Safety information’ on page 5 before installing the
fixture.
The fixture is designed for indoor use only and must be used in
a dry location with adequate ventilation. The fixture presents
risks of severe injury or death due to fire hazards, electric shock
and falls and is not intended for truss mounting or installation
with rigging clamps. The fixture must be installed by a qualified
technician. The safety of the installation is the responsibility of
the installer.
Locate the fixture at least 10 cm (4 in.) from adjacent surfaces.
Fasten the fixture to a secure structure or surface. Do not stand
it or leave it unfastened where it can be moved or fall over.
Fastening the fixture to a flat surface
The fixture can be fastened to a hard, fixed, flat surface that is oriented at any
angle. Ensure that the surface and all fasteners used can support at least 10
times the weight of all fixtures and equipment to be installed on it.
Fasten the fixture securely with at least two fasteners (not supplied) inserted
through the 7 mm (1/4 in.) curved mounting slots in the mounting bracket as
shown. The bracket’s 13 mm (1/2 in.) hole may also be used for fastening.
Use at least two fasteners for installation