Ruris VULCANO 200S, User Manual

Page: 31 / 76

EN
10
7. MAINTENANCE
7.1 Before cleaning the appliance, unplug it and let it cool. The housing gets dirty easily;
wipe it often with a soft sponge. Wipe dirty components with a sponge soaked in water
and weak detergent at <50 ° C, then dry the heater housing with a clean cloth. Be careful
not to let water enter the appliance. Do not spray water on the heater, do not use solvents
such as gasoline, etc. when cleaning the heater, to protect the housing.
7.2 Clean the cable and plug, dry them and wrap them in a plastic bag.
7.3 When store the heater, let it cool and then cover it with a plastic bag, put it in a packing
box and keep it in a dry, ventilated place.
8. TROUBLESHOOTING
Try the suggestions below to see if you can solve the problem before calling the service
center or the manufacturer.
Problem Possible cause Treatment
The heating system does
not work, even when the
switch is connected and
the thermostat is activated
Unplugged, incorrect
connection
Remove the plug, check the
plug-in connection, then
connect again
There is no current in the
socket
Insert the plug into another
outlet
The heating element
shines
The input voltage is too
high or too low
Use the power supply
according to the ranking on
the label