10
2. Using an inappropriate oil can lead to spark plugging, clogging the drain, or gripping
the piston segments.
3. Stay away from the power point at least 3 meters before starting the engine.
4. Using inappropriate fuel will cause severe engine failure in a short time.
7. PRE-OPERATIVE CHECKS
1.
Check that all screws are tightened and adjust them if necessary.
2.
Check each handlebar lever to check their functionality. If the positions of the
handles are incorrect, adjust them to be in the appropriate positions.
3.
Clean the unit of dust and dirt, especially the air filter.
8. COMMISSIONING
Starting and commissioning the drill
Make sure that the fuel filler cap is properly threaded and there is no risk of fuel leakage.
Prime the carburetor 3 times by operating the priming pump located under the
carburetor, see fig 6
.
Priming
Starter
Choke lever
Fig. 6
Fig. 7
Fig. 8
Actuate the shock valve upwards in the closed position fig. 7
