Ruris RX300S, Manual

Page: 108 / 200

EN
17
Flat washer
Emptying the collection bag
Hold lawn collector bag of the two back and bottom handles and lift it. The canopy will
turn around the rod and out of the collection bag. Then remove the collection bag from
behind the canopy rod from the machine.
As you hold the bottom
handle, lift the back section
of the lawn collector bag as
seen in the adjacent figure.
The cut lawn will fall. When
attaching the lawn collector
bag, make sure that the lawn
bag is on the canopy rod,
between the right and left
side of the console.
Height handle adjustments
The machine provides you with several positions for the handle and is sent with it in the
middle position. To adjust the height proceed as follows:
● Remove the starting string from the guide location.
●
Remove the end of the nut from the square screw.
● Move the bottom handle around the rear canopy to adjust the height.
Attach the bottom handle with nuts and washers to the square screws.
Hooks
Drowned screw
Flat washer
Grower washer
Butterfly nut