Ruris Gospodar A2, Manual

Page: 27 / 40

EN
7
2.2 RECOMMENDATIONS FOR THE USE OF THE HAMMER MILL
* Before first use, check the integrity of the mill supply (provided for in the "Technical
parameters" section) with the power supply of your circuit. local power supply.
* Use of the mill without adequate earthing is prohibited.
* When not in use, disconnect the appliance from the power source.
* Maintenance and repairs are performed only after the final disconnection of the device
from the power supply.
* Never leave the mill unattended.
* Do not use the mill with damaged cable or plug.
* It is forbidden to push grain with your hands while using the mill .
* It is forbidden to hold or use the hammer mill in high humidity conditions.
* It is forbidden to work at low engine speed and connect the locked engine to the power
supply (to avoid possible ignition of the electric motor and electrical installation).
* It is forbidden to open the front cover fixed to the mill chassis until the drum rotation is
completely stopped.
* It is forbidden to use other types of fuse fuses.
* To avoid overloading the power circuit, do not use the hammer mill with other high-
energy devices.
WARNING! Check the power supply circuit correspondence with the existing entry on the
appliance marking plate.