Ruris Gospodar A2, Manual

Page: 34 / 40

EN
14
continues, disconnect the mill from the electrical voltage and check the
operating path.
•
After the activity is complete, close the funnel and the power tub. Keep
the engine running for about 1-2 minutes, waiting for the powder to flow
from the outlet.
•
In case of defects during the warranty period, but also during the post-
guarantee period, it is forbidden to remedy them by unauthorized
personnel.
•
For any questions or malfunctions, contact authorized services on the
RURIS network
7. DEFECTS AND SOLUTIONS
Defects Causes Solutions
No crushing or
crushing insufficiency,
uneven granularity
1.
low rotation speed
2.
damaged sieve mesh
or different hole size
on it
3.
concacer hammer
wear
4.
the material is moist
5.
the engine
transmission wheel is
damaged
6.
the drive belt is worn.
1.
ensure the speed of
rotation
2.
change the mesh of the
sieve
3.
change the crusher
hammer
4.
dry the material
5.
hold or change the
transmission wheel
6.
change the drive belt
High bearing
temperature
1.
improper lubricating
oil.
2.
bearing wear.
3. material supply.
1.
change the lubricating
oil.
2.
change the bearing.
3.
control the supply of
materials.
Vibration and noise
1.
some weak
connection
components.
2.
the rotor is not in
balance.
3.
the engine
transmission wheel is
damaged.
1.
secure the loose
components.
2.
balance the rotor.
3.
change the engine
drive belt.