Ruris DAC 6000K, Manual

Page: 86 / 128

EN
14
Otherwise, if you attempt to start the engine suddenly by pulling the starter rope directly,
you risk engine seizure or serious engine damage.
Transmission oil supply
The capacity of the transmission oil bath is 1600 ml.
Use RURIS G-Tronic transmission oil or an oil of API classification: GL-4 or higher. The
maximum oil level of the gearbox is at the bottom of the oil filler hole on the right side of
the gearbox.
The tiller is not supplied with oil in the gearbox bath.
TRANSMISSION OIL CHANGE EVERY 50 OPERATING HOURS
6.2 FUEL SUPPLY
Use quality fuel from authorised petrol stations.
Fuel with the highest quality UNLEADED GASOLINE type fuel, using a metal funnel, in
open spaces and away from sources of fire or sparks, which could cause a fire.
WARNING:
Do not feed on the ground or around plants as you risk damaging the environment.
7. PRE-OPERATION CHECKS
1. Check that all screws are tight and adjust if necessary.
2. Check each handlebar lever (throttle, gearshift and reverse) for functionality. If
the handle positions are incorrect, adjust them to be in the proper positions.
3. Move the gearshift to neutral.
4. Oil topping up.
- Fill the engine oil sump with RURIS 4T- MAX lubricating oil.
- Place the machine on a flat surface while you feed transmission oil
into the gearbox.