36
Main Support no.: +370 5 2045030
Polish Support no.: +48 22 2092532
Ukrainian Support no.: +380 947 107319
[email protected] | www.ruptela.com
TCO
–
for TCO driver information reading.
Discard data
–
default option. If data packets from the tachograph have invalid CRC values, the
device will discard these packets. In this case, new records contain previously obtained K-Line
information (from data packets that had a good CRC value).
Put FF values
–
if data packets from the tachograph have invalid CRC values, the device will put
FF values in the records.
Tacho read
–
for Tachograph reading (including *.DDD file download).
CAN
–
if you put a tick in the 1st CAN interface checkbox, then a dropdown list appears, where you can
choose one of the following:
FMS
–
for vehicle CANbus (FMS) information reading.
OBD
–
for
OBD parameters and diagnostic trouble codes (DTC) and reading.
MobilEye
–
for communication with MobilEye device.
LCV
–
Not recommended for FM-Tco4 HCV devices.
HCV
–
for HCV CAN (heavy commercial vehicles) information reading.
DXP CAN
–
DXP electric vehicle information reading.
Tacho read
–
for
Tachograph reading (including *.DDD file download).
Trailers
–
reading trailer CAN parameters from the WABCO system.
J1939 + DTC
–
for
diagnostic trouble codes (DTC) reading from J1939 data line.
