Some IO options have conventional parameter measurement units (analog inputs,
temperature measurements, etc.) while others are defined in specific standards ( as CAN FMS 2.0).
Sleep
can be enabled (Fig. 2.3.9) to reduce power usage of the device, but sleep also
reduces response from device, because GSM modem and GPS are switched off (device does not
collect records based on GPS information and does not respond to SMS commands). Device enters
into sleep mode after no movement or ignition (depends on “Engine” selection (Fig. 2.3.3)) detected
for 10minutes. Device resumes instantly after movement or ignition detected.
2.4 Saving and loading configuration
Fig. 2.3.8 Hysteresis explanation
Fig. 2.3.9 Sleep selection buttons
Fig. 2.4.1 Configuration saving scheme
