of the week(or whole week). Also similar options are available for timetable clearing. It is important
to note that “Timetable” has higher priority than “Period” important. Lets say Period=3600s (1
hour) and timetable allows sending only from 12:30 to12:40 that day. If sending will start at 00:00,
next time it will send data at about 01:00. Eventually, device will attempt to send 12:00 and 13:00,
but timetable only allows sending 12:30-12:40, so no data will be sent that day. So it is not
recommended to have “Period” longer than smallest consecutive timetable period (according to Fig.
2.3.2 “Period” should be no longer than 1h=3600s).
Data collection
parameters (bottom middle(Fig. 2.3.3)) are used to set-up record collection
rules. “Time without engine” sets maximum period within which device must make records. It is
mostly used to make records when device is not moving, so this parameter should not be longer
than “Time with engine“ in coefficients section. “Engine” selection defines how FM-Xxx3 device
detects whether it is moving or standing still, this mostly affects record collection time-out:
Fig. 2.3.2 Timetable view
