Rupes LH16EN, Operating And Maintenance Instructions Manual

Page: 8 / 34

8
TECHNICAL DATA ENGLISH
TYPE LH16EN LH18EN
PROTECTION CLASS II II
OPERATING VOLTAGE 230 V - 50 Hz 230 V - 50 Hz
ABSORBED CURRENT 4,3 A 5,3 A
ABSORBED POWER 900 W 1100 W
ELECTRONIC OVERLOAD PROTECTION YES YES
ELECTRONIC SPEED CONTROL YES YES
ROTATION RPM 700 ÷ 1.700 750 ÷ 1.850
BUFFER PAD AND BUFFER DIAMETER MAX mm 200 200
SPINDLE THREAD M14 M14
WEIGHT Kg 1,9 2
SAFETY AND ACCIDENT PREVENTION INSTRUCTIONS
The safety and accident prevention instructions are reported in
the “SAFETY INSTRUCTION” booklet which forms an integral part
of these documents; the operating instructions indicate the
additional information required specifically for use of the tool.
Never use the tools without the safety guards (5-6-12).
Any operations carried out on the tool must be effected with the
power supply disconnected.
Before starting the tool, ensure that it is held tightly and not in
contact with the work surface.
Hazardous dust may form during use regulation safety devices for
personal protection and observe safety norms valid for the
processed work material.
Due to risks that may arise during polishing, we recommend the
constant use of P.S.D. (personal safety devices such as gloves,
GENERAL WARNINGS
headphones, goggles, face masks, etc.) according to laws in for-
ce to prevent or reduce accident probability.
Warning! the appliance continues to work for a few seconds after
it has been switched off!
CORRECT USAGE
The tools must only be used for polishing painted surfaces.
The tools must be used in a dry environment only.
Before use make sure that the disc pad work specifications are
compatible to the tool and are not broken or worn. Make sure
they are assembled, handled and stored with care according to
the manufacturer's instructions.
Make sure the work piece is sufficiently fastened.
The user bears sole responsibility for any damage or accidents
resulting from incorrect use.
8