6
Li-Ion
CE mark for EU market
Wear gloves
Wear a mask
Volt Direct Current
Per minute
Disposal of decommissioned
(WEEE Directive)
WARNING: To reduce the risk of injury, user must
read instruction manual
Wear ear protection
Wear eye protection
Ampere
No-load speed
Product contains Lithium-Ion.
Do not dispose this product with household rubbish
A
n0
V
/min
Summary of device labels containing safety information
TYPE HLR75
Voltage D.C. [V]
18
R.P.M. 3000÷5500
Electronic speed control
•
Battery life [min]
~45*
Ø Orbit [mm]
12
Ø Backing Pad [mm]
75
Ø Backing Foam [mm]
80-100
Backing Pad Thread
M6
Weight [Kg]
1,1**
TECHNICAL SPECIFICATIONS
* The value is referred to a use of the battery pack 9HB180LT, fully charged with the charger 9HC180LT.
** measured without the functional units: battery pack or power supply.
CORRECT USAGE
• This tool is designed to be used as a polisher.
Read all safety warnings, instructions, indications provided on
drawings and specifications provided with this tool. Failure to comply with all instructions provided below may cause
electrical shocks, fire and/or serious injuries.
• This tool is not intended to be used for smoothing, metal brushing and cutting operations.
The use of this tool
for unintended applications may cause hazards and injuries to people.
• Air vents often cover moving parts and should be avoided.
Loose clothes, jewellery or long hair can be
caught in moving parts.
• Clean out your tool often, especially after heavy use.
Dust and grit containing metal particles often
accumulate on interior surfaces and could create an electric shock hazard.
• The tool must be used with accessories that have been specifically designed or recommended by the
manufacturer.
The fixing of the accessory to the tool does not guarantee a safe operation.
•
The rated speed of the accessories must be at least equivalent to the maximum speed specified on the
tool.
Using the accessories at speeds above the rated one, may cause them to break or be projected into the air.
• The external diameter and thickness of the accessories must match the specifications of the tool.
Accessories with incorrect dimensions cannot be adequately protected or controlled.
• The configuration of accessories must match the tool.
The use of accessories that cannot be perfectly fitted
on the tool may result in imbalance, excessive vibrations and in the impossibility of controlling the tool.
• Do not use damaged accessories. Before use, inspect all the accessories. Inspect the supporting pads
and verify there are no cracks, tears or excessive wear. If the tool or accessory has fallen, verify that it
is not damaged or install a new accessory. After inspecting or installing an accessory, test the operation
