3
ATTENTION
-
Maintain the arm well.
-
Always keep it in ideal condition and clean.
-
Strictly follow the instructions on the safe use of the arm.
-
Any possible repairs should be carried out in service centres, using original spare parts only.
Failure to follow these rules may result in serious damage.
THE UNIT SPECIFICATIONS
-
Length: 5 m – 6 m
-
Diameter: 10 m – 12 m
-
Weight: 82 kg – 92 kg
-
Two 16 A electric sockets with separate installation
-
One 16 A electric socket with separate installation
-
1 light with 300 W halogen lamp
-
1 switch MAN-0-AUT
-
1 safety cut-out switch – supply pressure max 10 bar
-
2 quick connections for compressed air with flow capacity 1500 l/min – max pressure 8 bar
-
1 quick connection for dry compressed air with pressure regulator and manometer, one double dust
extraction coupling
1. 16 A electric socket
2. 16 A electric socket
3. Lighting switch
4. Lamp with 300 W halogen bulb
5. Voltage indicator
6. Fuse
7. MAN-0- AUT switch
8. Safety cut-out switch
9. Compressed air connection terminal
10. Dry compressed air connection terminal
11. Pressure regulator
12. Manometer
13. Dust extraction pipe tee
1.
ARM INSTALLATION
Before starting the arm installation procedure, check that there is no obstacle in the field of its
operation
(Fig. 1).
Attention: Walls and columns, on which the arm will be installed, should be necessarily made of
reinforced concrete. For any other wall type consult the NTS Technical Service.
Fig. 1
