5
※
Make sure a check valve is equipped between the device and water heater when a heating
stove or water heater is connected behind the device, in case of hot water reflux and damage the
inner system of the product.
※
Separate sewer line for the device is required. 5 to 10cm clearance must be maintained
between the drain pipe and floor drain, in case of siphon and cause valve damage by the waste
water.(Installation refer to below picture)
※
Before installing the pipeline, please clean the residual impurity and dust in the pipeline.
After the main water inlet is closed, connect it with the device.
※
All of pipeline that used should meet the relevant regulations, and the installation should
accord with the local installation rules.
※
When install, please keep a certain operation space for adding salt, cleaning and
maintaining.
8.2Installation and Connection
※
Pipeline installation and connection should conform to the local installation rules.
Inlet/outlet should be connected with the water pipe in the same axis (Refer to the below
installation picture). The position of inlet and outlet shouldn’t be reversed.
※
It is suggested to install a manual bypass valve between the main water inlet and
inlet/outlet of the device, making it convenient for installation and maintenance. (Refer to the
below installation picture).