8
A.
Button lock indicator
●
Lights on, indicating the buttons are locked. At this moment, press any single button will not
work (No operation in one minute,
will light on and lock the buttons.)
●
Solution: Press and hold both
and
for 5 seconds until the
lights off.
B.
“
”
Menu/Confirm button
●
Press
under the service status, the system turns into setting interface. Select the item and
inquire the value.
●
Under inquiry status, press
and the digits flash. It turn into setting interface, and you can
adjust the parameters by press
and
.
●
After the setting, press
and turn into setting interface by saving the settings with a
“
Di
”
sound.
C.
“
”
Manual/Return button
●
Press
under the service status, the system will finish current status and turn into next status
immediately. (For example: If the quality of outlet water fails, after unlocking the buttons, press
in service status, it will start regeneration cycles instantly; During the cycle of regeneration, if you
want finish current steps in advance, press
and it will turn into next step at once.)
●
Press
under the inquiry status, the system will turn back to service status interface; Press
under the setting status, the system will turn back to inquiry status.
●
Under the setting status, press
and the system will turn back to inquiry status without saving
the setting value.
D. Down
and Up
●
Under the inquiry status, press
or
to view all values.
●
Under the setting status, press
or
to adjust values.
●
Press and hold both
and
for 5 seconds to lift the button lock status.
※
Parameter Setting (By users)
Item
Parameter Set Arrange
Factory Default
Time of Day
00:00
～
23:59
Current time
Rinsing Time
00:00
～
23:59
02:00
●
Press and hold both
and
for 5 seconds under the service status, till the
lights off.