11
A1
A2
A3
A4
A5
B. Parameter set in background
Parameters could be set in background: Set Mode, Set Valve Model, Set Service Days, Set
Backwash, Set Fast Rinse(For water filter setting)
a) In the H1 interface, select the “Mode” and press
, as the figure A1 shows. Press
or
to
select the mode that you need. Select Filter for water filter. After that, Press
to save the setting
and turn back to H1; or press
to turn back to H1 without saving the setting.
b) In the H1 interface, select “Set Valve Model” and press
, as the figure A2 shows. Press
or
to select the matched valve type. Press
to save the setting and turn back to H1; or press
to turn back to H1 without saving the setting.
c) In the H1 interface, select “Set Service Days” and press , as the figure A3 shows. Press
or
to select the days that you need. Press
to save the setting and turn back to H1; or press
to turn back to H1 without saving the setting.
d) In the H2
interface, select “Set Backwash” and press
, as the figure A4 shows. Press
or
to select the backwash time that you need. Press “
”to save the setting and turn back to H1; or
press “
” to turn back to H1 without saving the setting.
e) In the H2
interface, select “Set Fast Rinse” and press
, as the figure A5 shows. Press
or
to select the fast rinse time that you need. Press
to save the setting and turn back to H1; or
press
to turn back to H1 without saving the setting.
Illustration: For this
series products, you don’t need set the background parameters. All of them
are already set by manufacturer according to the product type and specification. If you have to
reset, please makes sure the work is done by professional.
※
Parameter Set (Only for factory or professional dealer)
Model
Backwash Time (Minute)
Fast Rinse Time (Minute)
Regeneration Days (Day)
RL-J50
2
2
5
Set Fast Rinse
3Min.