RUNLUCKY SHOWER SOFTENER
2
1. Product Overview
1.1. Characteristics
●
Wall-mounted, no brine tank, small volume.
●
Dynamic regeneration mode, bigger water treatment capacity, save salt and water.
●
Extensive applicability: could be installed before or after the water heater. Installed before water heater
could prevent it damaged because of scaling.
●
Automatically controlling the regeneration time, one button to realize regeneration. No need people
stand by, LED display each status.
●
Remind the use days and show the next regeneration time.
●
It has an automatic backwash function to reduce the phenomenon of resin harden and strainer
blockage, and improve the service lifetime of resin.
●
Internal structure adopts quick connection, more easier to maintain and replace the resin.
●
There is a check valve on outlet to prevent the water in water heater backflow.
●
Data saved after power off.
1.2. Technical Parameters
Item
Requirement
Working Pressure
0.1
～
0.6MPa
Inlet Water Temperature
5
℃～
70
℃
Environment Temperature
5
℃～
50
℃
Electrical Facility
AC100
～
240V/50
～
60Hz
Water Treatment Capacity
750L
Inlet/Outlet
G1/2
Salt Consumption of Regeneration
400g
Applicable Water
Municipal Tap Water
Outlet water quality: Meet the requirement of Sanitary Safety and Function Evaluation
Regulation of Water Treatment Device for Drink Water-General Water Treatment Device (2001).
All the parameters of the product is tested under the standard test condition (Tested water hardness is
CaCO3, 200 mg/ L) . The parameters will be different if the actual usage condition changed.
1.3. Water Technological Process
Municipal tap water Na cation resin
Soft water
1.4. Appearance Dimensions
1.5. Structure Chart
