RUNLUCKY SHOWER SOFTENER
10
regeneration button
to switch it to water using status.
Note:
During the switching of regeneration process, there will be some water flowing out from outlet.
Make sure the outlet of sprinkler not face to the shower softener.
5. Resin Replacement
It needs to replace the resin after the shower softener being used for 2 to 4 years. It is
recommended to do it by professional personal. If you replace the resin by yourself, please
follow these steps:
a.Unscrew 4 bolts on back cover and 2 bolts on clevis by a cross screwdriver.
b. Take out the front cover of shower softener. Be sure not scratch the surface.
c. Unscrew 4 bolts which are used to fix resin tank to back cover by a cross screwdriver.
d. Take out the resin tank and valve. Taking them with care to prevent causing damage of circuit board.
e. Unscrew the resin tank cover with a special tool.
f. Take out the strainer carefully and prevent the riser pipe falling out.
g. Press the riser pipe to prevent it falling out. Pour out of resin, and put 2.5 liters of new resin in to resin
tank.
h.After resin replaced, assemble the shower softener according to the above instruction.
Install the shower softener according to above steps, please note:
1.Thread on resin tank and O-ring should be cleaned.
