Runco Q-650i Series, Installation & Operation Manual

Page: 50 / 92

Operation
36 Q-650i Installation/Operation Manual
PRE
L
IMINAR
Y
Memory: Select Memory from the Main menu, then press ENTER to recall image quality
settings previously saved, or to save changed settings in any of four memory locations.
• Recall Memory: Select Recall Memory from the Memory menu to recall saved image
quality settings. Unless you select Default (see below), this control affects all sources,
not just the active source.
• Custom 1 and Custom 2 contain the factory default settings when the projector is
initially turned on.
• When you recall the I S F Day or I S F Night memory settings, all settings associated
with these stored values are grayed out. This prevents unintended adjustments from
being made. To remove this restriction, choose
Custom 1 or Custom 2 .
I S F Day and I S F Night are grayed out unless these custom settings have already
been saved.
• Choose Default to restore the factory-default settings for the active source only. The
other sources are unaffected.
• S ave S ettings: Select Save Settings from the Memory menu to save any
image-related settings you have changed to Custom 1 or Custom 2 .
The following items are saved (for all sources, not just the active source):
• Brightness / Contrast
• Color / Tint
• Sharpness
• Noise Reduction
• Color Space
• Video Standard
• Gamma
• Color Temperature
• DLP Frame Rate
• Color Gamut (including PCE settings)
• ConstantContrast
• Adaptive Contrast
• RGB Adjust (all settings in sub-menu)
• S ave I S F: Select Save ISF from the Memory menu to save any image-related settings
you have changed to the I S F Day or I S F Night memory location.
The settings that are saved are the same as those saved with the Save Settings
command (see above).
You must enter a passcode to access the Save ISF
sub-menu.
Note