Installation
Lightstyle™ Series LS-100d Installation/Operation Manual
19
PRE
L
IMINAR
Y
3.5
Connections to the
LS-100d and DHD
Controller
Proceed as follows to connect the DHD Controller to the LS-100d, your video sources,
external controller(s) – if present – and AC power.
When connecting your equipment:
• Turn off all equipment before making any connections.
• Use the correct signal cables for each source.
• For best performance and to minimize cable clutter, use high-quality cables that are
only as long as necessary to connect two devices. (Don’t use a 20-foot cable when a
6-foot cable will suffice.)
• Ensure that the cables are securely connected. Tighten the thumbscrews on
connectors that have them.
Connecting the DHD
Controller to the LS-100d
Digital Video Connection:
Connect the HDMI Output of the DHD Controller to the DHD
Input of the LS-100d as shown in Figure 3-1.
Figure 3-1. Connecting the L
S
-100d to the DHD Controller
Video 1
Y
Video 2
Pr
Pb
IR
Display Control
HDMI 1
Ethernet
HDMI Out
To Display
HDMI Ou
Audio Only
Component / SCART
TRIGGERS
1
2
3
Video 1
Y
Video 2
Pr
Pb
IR
HDMI 1
Ethernet
HDMI Ou
Audio Only
Component / SCART
TRIGGERS
1
2
3
POWER
ERROR
TEMP
RS-232
HDMI Out
To Display
Display
Control
