8
PREcIsIon tooLs
GB
I english
noise Emission
Warranty
Wear ear protectors!
the indication of noise emission is measured according to DIn 45 635, part 21. the level of acoustic pressure on the work place could exceed
85 dB (A); in this case protection measures must be taken.
the typical hand-arm vibration is below 2.5 m/s².
Measured values determined according to En 60 745.
Vibration emission value ah 1,3 m/s2
Uncertainty K 0,2 m/s2
the declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission may differ. this may significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not
actually doing the job. this may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
According to the general supply conditions for business dealings, suppliers have to provide to companies a warranty period of 12 months for
redhibitory defects. (to be documented by invoice or delivery note). Damage due to natural wear, overstressing or improper handling are
excluded from this warranty.Damages due to material defects or production faults shall be eliminated free of charge by either repair or replacement.
complaints will be accepted only if the tool was returned in non-dismantled condition to the manufacturer or an authorized RUKo service centre.
