5
PREcIsIon tooLs
GB
I english
safe use of the tool is only possible if the user had studied the instruction manual and safety instructions completely and is strictly
following the instructions contained therein. Additionally, the general safety instructions of the leaflet supplied with the tool must be
observed. Prior to the first use, the user should absolve a practical training.
Work concentrated and carefully.
Keep your work-place clean and avoid dangerous situations.
In order to protect the user, take precautions.
01. the tool must neither be wet nor used in humid environment.
02. Do not use the tool in an environment with danger of explosion.
03. Do not use the tool standing on a ladder.
04. Do not drill into asbestos-containing materials.
05. Do not carry the tool at its cable, and always check the tool, cable and plug before use. Have damages only repaired by specialists.
Insert the plug into the socket only when the tool switch is off.
06. Modifications of the tool are prohibited.
07. Unplug the tool and make sure that the switch is off if the tool is not under supervision, e.g. during preparation and take-down works, at
power failures, for insertion or mounting accessories.
08. Unplug the tool if is stops for any reason. so you avoid sudden starts in unattended condition.
09. Do not use the tool if its shell, switch, cable or plug are damaged.
10. Always lead the mains and extension cables as well as the dedusting hose from the tool to the back.
11. Electrical tools have to be inspected visually by a specialist in regular intervals.
12. After a break, check that the drill bit can moved freely before you turn on the tool again.
13. the tool may be used only in two-hand operation or with the drill rig. Keep the handles dry, clean, and free of oil and grease.
14. Do not touch rotating parts.
15. Persons under 16 years are not allowed to use the tool.
16. During use, the user and other persons standing nearby have to wear suitable goggles, helmets, ear protectors, dust mask,
protective cloves and boots
17.During manual operation, always hold the tool with both hands and be fall-safe. consider the tool’s reaction torque in case of blocking.
18. Always work with concentration. Always work in a carefully considered way and do not use the tool if you are lacking consideration.
For further safety instructions, see the enclosure.
General safety advice
