Chapter 1 Product Overview
S7800 SeriesHardware Installation Guide
4
Figure 1-3
RG-S7806-ISeries Module Installation
○
1 Installation handler, used to help the device racking;
○
2 M7806-FAN I installation location;
○
3 M7800-CM module installation location;
○
4 M7800 series service card installation location;
○
5 Anti-static wrist strap hole;
○
6 Air-filter installation location;
○
7 System power module installation location;
○
8 Installed PoE power module installation location;
○
9 Grouding point
Note
1. Total 6 slots for the single-card insertion are on the front panel of the
chassis, of which the two slots with the marking of M1 and M2 are for the CMs
to implement the redundancy management function, and the four slots with
the number 1
、
2
、
3
、
4 are for different service modules according to the
application requirements.
2. Total 4 power slots are on the back of the chassis, of which the three
upper slots are for the system power module, and the lowest slot is for the
PoE power module. Note that you shall correctly insert the power module to
the correct slot.
3. The vertival fan slot locates on the left of the module plug-in frame of the
chassis.
4. The mandatory components for device
’
s normal working are the control
module, fan module and the power module.
5. With the PoE service card module M7800P-48GT used in the system, the
PoE power module RG-PA300P must be inserted to the PoE power slot.
6. PoE power module can be extended to connected the external PoE
power, providing higher PoE power.
