Hardware Installation and Reference Guide
Product Installation
- 18 -
Distinguish the left and the right rear brackets according to the marked directions.
The rear brackets provided are only applicable for cabinets with depth of 800mm to 1200mm.
3.5 Installing and Removing a Fan Module
Wear anti-static gloves before the following operations.
Installing an Fan Module
1.
Take out a new fan module from the fan module box.
2.
Hold the handle at the end of the fan module. Insert the fan module to the chassis slowly along the guide rail until it
is fully seated, and make sure that it is in good contact with the slot.
3.
Tighten the captive screws with a screwdriver to fix the fan module in the switch chassis.
Figure 3-3 Installing a Fan Module
Insert the fan module smoothly. Pay attention to the direction of the fan panel to avoid wrong insertion.
If the position is not proper, withdraw the inserted module and re-insert it.
