Ruijie RG-RAP1200 Series, Hardware Installation And Reference Manual, Page: 11 / 19

·
Hardware Installation and Reference Guide Installing the Access Point

Disconnect the device before cleaning it.

Do not wipe the device with a damp cloth.

Do not wash the device with liquid.

Do not open the enclosure when the AP is working.

Fasten the device tightly.
3.4 Installing the Access Point
1) Loosen screws on the 86-type faceplate that is mounted on the wall.
Figure 3-1 Loosen Screws on the Faceplate
2) Connect the Ethernet cable to the WAN/PoE port.
Figure 3-2 Connect the Ethernet Cable to the WAN/PoE Port
3) Align screw holes on both sides of the device over those on the faceplate. And then tighten screws with a
screwdriver.
Figure 3-3 Tighten Screws with a Screwdriver