RG-IS2700G Series Switch Hardware Installation and Reference Guide
Connect the power cables of different colors to the corresponding grounding posts.
Ensure that the connected power cables have sound contact.
Do not place heavy items on the switch.
Reserve a spacing of at least 10 cm around the chassis for good ventilation. Do not stack the devices.
The switch should be located at places free from the direct sunlight, large power radio launch pad, radar launch pad, and
high-frequency large-current devices. If necessary, electromagnetic shielding should be adopted. For example, use interface
cables to shield cables.
3.3.2 Mounting the Switch on a DIN Rail
1. Place the switch on the site where has sufficient space for heat dissipation.
2. Mount the DIN rail to the rail bracket, as shown in the following figures.
Figure 3-1
Figure 3-2
Figure 3-3
