·
Hardware Installation and Reference Guide Product Overview
Rogue AP detection and countermeasure
Support
Dynamic ACL assignment
Support
RADIUS
Support
CPU Protection Policy (CPP)
Support
Network Foundation Protection Policy (NFPP)
Support
Routing
IPv4 address
Support
IPv6 CAPWAP tunnel
Static IP address or DHCP
ICMPv6
Support
IPv6 address
Support
IPv6 tunnel
Not supported
ISATAP
Not supported
Multicast
Multicast to unicast conversion
Network management
SNMP v1/v2C/v3, Telnet, TFTP, and FTP and
Web management
Management
and
Maintenance
Fault detection and alarm
Support
Statistics and logs
Support
FAT/FIT switchover
Support
1.2 Product Image
The AP provides two built-in radio ports, one 10/100/1000Base-T Ethernet WAN port on the rear panel, and four
10/100/1000Base-T Ethernet LAN ports on the front panel.
Figure 1-1 Image of RG-AP130(W2)
PoE/UpLNK port, the yellow port, is the 10/100/1000Base-T WAN port (PoE-capable).
Pass Through port, the blue port, and its equivalence on the side are straightly connected.
Figure 1-2 Side View of RG-AP130(W2)
