·
3.3 Precautions
The device can be mounted on a wall or a pole (diameter: 50 mm to 70 mm). If the diameter of the pole is out of the range,
the hose clamp is customer-supplied
(thickness ≥ 2.5mm). The installation site can vary due to on-the-spot surveys
conducted by technical personnel.
Please make full preparations as described in Chapter 2 and observe the following precautions before installing the
device.
Do not power the device during installation.
Install the device in a well-ventilated location.
Do not subject the device to high temperatures.
Keep away from high voltage cables.
Do not expose the device in a thunderstorm or strong electric field.
Keep the device clean and dust-free.
Disconnect the device before cleaning it.
Do not wipe the device with a damp cloth.
Do not wash the device with liquid.
Do not open the enclosure when the AP is working.
Fasten the device tightly.
3.4 Installing the Access Point
Preparation before Installing
Adjust the angle of the access point to 0°, and fix the access point with M4x10 screws.
Figure 3-1 Adjust the Angle of Access Point
Wall mount
