RG-EasyGate Series Hardware Installation Guide V1.60
cross-over cables.
The Gigabit fiber port is supported on the
1000BASE-SX/LX/ZX mini GBIC module and
GE-SFP-LX20/LH40-BIDI SFP module.
The tenGigabit fiber port is supported on the
XG-SFP-SR-MM850, XG-SFP-LR-SM1310,
XG-SFP-ER-SM1550 and BIDI SFP modules.
One management port, which is the GE 0/0 combo port. The
MGMT port supports 10/100/1000 M adaptive and automatic
recognition of the network cables and the cross-over cables.
One console port
One USB2.0 port
BYPASS
Not supported
Hardware Disk Module
One 1TB hardware disk is provided.
Expansion Module
Not supported
Hot-swapping
Hard disk hot swapping is not supported.
Interface Standard
Ethernet: 10Base-T/100Base-TX/1000Base-TX,
1000BASE-SX/LX/ZX, 10GBASE-SR/LR/ZR
Console port: RS-232
Dimension (W x H x D)
440mm x 43.6mm x 200mm (excluding the foot pad)
Voltage
100VAC to 240VAC; 50/60 Hz, 0.65A
Power Consumption
Less than 25W
Working Environment
Temperature: 0°C to 45°C (32°F to 113°F)
Humidity: 10% to 90% RH (non-condensing)
Not all USB disks are supported.
The Kingston USB disk with FAT 32 is recommended.
Please avoid the vibration and collision in the process of moving and usage.
Products should be transported in original packets.
Format a hardware disk to
.EXT3
before installing it.
To power off the device, please turn off the power button. Do not remove the power cable until the PWR led turns off,
or else the hardware disk will be damaged.
The 10GE fiber port does not support the direct connection between two EG3250 devices via the SFP module or
fiber cables.
LED Indicators of Ruijie EG3250 Breakout Gateway
Table 1-2 LED Indicators of Ruijie EG3250 Breakout Gateway
LED Indicator
Working status
PWR
Solid green indicates that the power module is working properly.
