RG-EasyGate Series Hardware Installation Guide V1.60
If the device is installed in a cabinet, check whether the angle bar for device installation is steady. If the device is
installed on the workbench, check whether sufficient room is reversed around the device to ensure heat elimination
and whether the workbench is steady.
Check whether the power supply meets the requirements.
Check whether the earth wire of device is properly connected.
Check whether the device is connected correctly to other devices like the configuration terminal.
Starting and Configuring the Breakout Gateway
Starting a Breakout Gateway
Powering on the Breakout Gateway
Checks before Power-on
Before power-on, perform the following checks on the breakout gateway:
Whether the power cable and the ground wire are properly connected;
Whether the power voltage is consistent with the requirement of the breakout gateway.
Whether the configuration cable is properly connected, and whether the microcomputer or terminal for gateway
configuration is started or configured.
Before powering on the breakout gateway, be aware of the location of the power switch of the breakout
gateway to timely cut off power supply in case of any accident.
Powering on the Breakout Gateway
Turn on the power supply switch of the breakout gateway
Turn on the power switch of the breakout gateway and set the power switch to "ON" position.
Checks after Power-on
After the breakout gateway is powered on, check the following items:
Whether the ventilation system works normally
Checking procedure: After power-on, you can hear the fan working; put your hand nearby the vent hole of breakout
gateway to feel the airflow.
Whether the LED indicators on the front panel of the breakout gateway works normally.
Checking procedure: Refer to the section of indicators description about each product in the first chapter
“Product
Overview
”.
Whether the configuration terminal displays normally
Checking procedure: After the breakout gateway is powered on, the terminal will display the software self-extracting
information of the breakout gateway.
