5)
After setting the serial port parameters, click
OK
.
Now many PCs do not have Console ports and systems do not support hyperterminals. Therefore, Console-to-USB
cables and terminal emulators (e.g., SecureCRT) are needed.
Parameter Settings
Step 1. Connect both ends of the Console-to-USB cable to the Console port of the device and the USB port of the PC
properly.
Step 2. Right click
My Computer
and click
Management
. Choose
Device Manager
>
Port (COM and LPT)
,
and the
COM port number will be displayed.
Step 3. Set terminal parameters. The parameters are as follows: baud rate 9600, data bit 8, parity check none, stop bit 1,
and no flow control.
1)
Choose
File > Connect
,
click
New Session
in the displayed list, and select
Serial
in the
Protocol
dropdown list.
Click
Next
, and the following interface will be displayed.
Figure 4-5
