Place the switch on the table, as shown in Figure 3-7.
Figure 3-7 Mounting the Switch on the Table
The device must be installed and operated in the place that can restrict its movement.
3.3.4 Connecting Power Sharing Cables
The S2910-24GT4XS-PS-E switch supports power sharing among up to 3 devices. The cable-connecting steps are as
follows.
Step 1: Remove the dust cap on the Powershare ports to be used.
Step 2: Insert one end of the power sharing cable into a Powershasre port and then tighten the screw. There are
0.5/3/10m power sharing cables for choice.
Figure 3-8 Power Sharing Cable
