Ruijie 5/8-Port Plastic Series Switches Hardware Installation and Reference Guide
3.4 Adding Unmanaged Device to Topology
Note: There must be devices that can be managed in the network, including Reyee EG or ES2/NBS switches.
Scenarios:
Add a new unmanaged switch: Select its uplink device, and scan the QR-code on the switch or manually add it to the
topology.
If the unmanaged switch is already added to the topology and displayed as a virtual device: Select the virtual device,
and scan its QR-code or manually enter its information to the topology.
3.4.1 Scanning QR-code of Unmanaged Device
1.
Tap
Topology
to open the topology page.
2.
Tap the
Topology
button, and select the existing managed device. To add an unmanaged downlink switch by
scanning its QR-code, select
Scan to Add
.
3.
After the device is detected, select its uplink port. And the device is added successfully.
