Table 1-2 LED Indicators on RG-AP130-W
State
Frequency
Meaning
Off
N/A
The AP is NOT receiving power. Or the AP is in Do Not Disturb
mode, which can be disabled by software.
Solid green
after fast
blinking
Fast blinking: 2.5Hz
Initialization in progress.
Continuous
fast blinking
green
2.5Hz
1. Initialization in progress.
2. Firmware upgrade in progress. Do not power off.
3. Initialization is complete, but the CAPWAP connection is
faulty.
Slow blinking
green
0.25Hz
Normal operation, and at least one wireless client is associated
with the AP.
Blinking green
1 blinking every 4 seconds
Normal operation, but no wireless clients are associated with
the AP. The device operates in low-consumption mode.
Solid green
N/A
The LAN port is not connected.
Reset button
Press for less than 2
seconds
Reset the system.
Press for more than 3
seconds
Reset the system and restore the factory settings (namely, the
AP is operating in FIT mode).
1.4 Installing the RG-AP130-W Wireless Access Point
Step 1: Remove the 86-type panel from the wall with a screwdriver. (If needed)