Note
①
Console (Micro USB)
②
Reset button (diam:
1.5mm)
③
Power port (powering the
device through the power
adapter)
④
RJ45 pass through
port (RJ11 combo)
⑤
Key hole
⑥
Locking bar hole
The key hole and locking bar hole are used with security accessories.
Figure1-5 Rear View of RG-AP130-W
Note
①
1000M PoE uplink port
②
RJ45 pass through port
(RJ11 combo)
The access point can be powered either with a DC power adapter or through Power over Ethernet (PoE).
When powering the device through PoE, you need to connect one end of an Ethernet cable to the PoE/uplink port
and the other end to a PoE-capable switch or any power sourcing equipment.
When powering the device through DC power adapter, you need to connect one end of an Ethernet cable to the
PoE/uplink port and the other end to a switch.
The pass through ports (RJ45)
on the rear panel and the side panel are directly connected.
1.3 Button and LED Indicators
The LED indicator is inside of top plate cover, and works after you power on the device.
You can also use the
quiet-mode
and
schedule
commands on the AP or AC device to configure the quiet time range.