·
The
serial
port
console has no output
or
outputs
illegible
characters.
The serial port connected to the access
point does not match that opened by
the configuration software.
The serial port is not configured
correctly.
Change the serial port opened by the configuration
software to be the one connected to the access
point.
Check that the parameter configuration of the serial
port matches that specified in the instructions.
The RJ45 port is not in
connectivity or it is
erroneous
in
receiving/transmitting
frames.
The connected twisted pair cable is
faulty.
The length of the cable exceeds 100 m.
The port has special configuration that
has no common working mode with the
connected access point.
Replace the twisted pair cable.
Check that the port configuration has the common
working mode with the connected access point.
The fiber port cannot
be connected.
The Rx and Tx ends are connected
reversely.
The interconnected optical module type
does not match.
The fiber type is not correct.
The length of the optical fiber exceeds
that rated of the optical module.
Switch the Rx and Tx ends of the optical fiber.
Replace the optical module with one of the
matched type.
Replace the optical fiber with one of the
appropriate type.
Replace the optical fiber with one of the
appropriate length.